Scoop coater is a necessary tool for proper application of all direct liquid emulsions. Our coater is one of the most price competitive and best designed emulsion scoop coaters in the screen printing industry. They are designed for easy and comfortable handling while providing a smooth layer of emulsion on your screen. The coating angle is designed on a perfect angle. It’s calibrated to give you a perfect coating of emulsion every time.
| Name: | Screen Printing Emulsion Coater Trough | ||
| Material: | Aluminum alloy | Brand: | MACROKUN |
| Model： | MKECT-V, MKECT-U, MKECT-T | ||
| Length： | 4″,6″,8″,10″,12″,14″,16″,18″,20″,24″ , customized (up to 3m) | ||
| Surface treatment: | Sand acid oxidation | ||
| End cap color： | Yellow, green, red, customized | Package： | Carton |
Emulsion Coater Trough
Model: MKECT-V
Dual edge (both thick and thin) design permits coating emulsion thicker or thinner on the screen.
Thinner coats are usually desirable on higher mesh count (200mesh and above) for half-tones and finer detail like 4-color process where thicker coats are usually used for spot color on lower mesh counts (below 200mesh).
Feature:
Convenient to use,
Large emulsion reservoir,
Angled plastic end caps,
Available in most sizes – 2″to 72″.
Coat the substrate side of the screen first. Begin your coating pass at the bottom of the screen. Firmly support your screen as you press the edge of the scoop coater against the mesh. Move slowly up the screen and slow down to a stop near the top. Twist the scoop coater upwards and off of the mesh. Flip the screen quickly and repeat on the ink well side.
MACROKUN has established long-term and stable cooperative relations with many transportation companies such as China Post, DHL, FEDEX, USPS, UPS, etc. Of course, MACROKUN can also provide air and sea transportation. The powerful logistics system enables all MACROKUN'S Printing Mesh, Filter Mesh and Filter Bags and so on to be easily and efficiently transported to any place. For quotes and inquiries, please email our sales team.
