» Floor Type Six Color Six Station Double Wheel Screen Printing Machine

The frame chuck part and the platen part can be
rotated 360 degrees freely;
the operator can operate in any position or any platen station.

Each screen frame fixing device is configured with
six micro adjust knods.
By using the knobs,
user can micro adjust the screen frame from front to back,
from left to right.
It can make the overprinting more simple and more accurate.
User can finish all the screen frame’s overprinting positioning at
any pallet station.
All the screen frames’  position is correct to any one pallet,
the other one pallet will be correct,
then the user can start overprinting.
There is no need to correct the position of every pallet.

Each screen frame’s fixing device is equipped with
precise positioning wheel,
when the positioning iron on the arm placed in positioning wheel closely,
it can ensure the printing precision .

Each frame fixing device is equipped with
a clamp height positioning adjustable knob for
adjusting the height of the chuck after it is lowered.

The silk screen frame clamp can adjust the spring tension by
screws according to the weight of the frame to
achieve the most suitable balance pull-out tension.

The platen can be moved back and forth through the bottom connector.

The hex support rods with adjustable reinforcement are
installed on the lower part of each platen.
The user can rotate the hex support rods to s
trengthen the stability of the platen and adjust the parallelism to
ensure the platen is more stable and the printing is more accurate.

1. The screen frame chuck can be adjustde up to 5 cm (2in) according to the height of the substrate.
   T-shirt type pallet of the machine is 55 cm (22 in) long,
2. 45 cm(18 in)wide, the thickness 1.8 cm(0.7 in);
3. Using furniture surface melamine high density board,
4. the surface with small pits,and it is more suitable for
5. printing T-shirt when scraping the pallet glue.