» Sea Water Nylon Filter Mesh Hight Tension 50-600 Micron Sea Water Filtration Mesh

Sea Water Nylon Filter Mesh Hight Tension 50-600 Micron Sea Water Filtration Mesh

Sea water nylon filter mesh introduction

Seawater exhibits an average salt content (salinity) of approximately 35 per mill. However, in order to separate the water from organic substances, such as algae or fine particles, the seawater has to be pretreated. For this purpose, a fine filter is installed between a coarse separator and the chemical or physical disinfection unit. This removes microbial organism, mollusks and plant formations along with suspended particulate, from the ballast water .

The criteria that apply to filter systems for seawater filtration are challenging and manifold. Seawater filters have to

• Combine the required filter fineness with high flow rates and a long service life.
• Comply with the required separation efficiency.
• Prevent the filter mesh from clogging despite the high load of ballast water.
• Withstand the aggressive nature of seawater.
• Be easy to install, retrofit, operate and service.
• Require limited space.
• Contribute to keeping the operating costs of the system as low as possible.

Sea water nylon filter mesh specification

Our Sea water nylon filter mesh is food grade with FDA certification, no silican, AZO free, 100% nylon material.

Choosing our nylon mesh is the best choice for your industry.

Sea water filtration Application

Sea Water Nylon Filter Mesh is often used to produce service and drinking water, as well as for cooling purposes. They used in the following markets:

Desalination, Reverse Osmosis
Ship operation technology, Ballast Water, Cooling Systems, Gas Scrubber, LNG
Oil and Gas, Water Injection
Water extraction
Municipal water treatment, UF Ultra Filtration, MF Membrane Filtration
Power & energy, make-up water, FGD, Scrubber, Screen Wash Water, HVAC, Cooling Tower