» SIDE COVER OF EMULSION SCOOP COATER

Screen Printing Emulsion Coater Trough

Scoop coater is a necessary tool for proper application of all direct liquid emulsions. Our coater is one of the most price
competitive and best designed emulsion scoop coaters in the screen printing industry. They are designed for easy and comfortable handling while providing a smooth layer of emulsion on your screen. The coating angle is designed on a perfect angle. It’s calibrated to give you a perfect coating of emulsion every time.

Name:	Screen Printing Emulsion Coater Trough
Material:	Aluminum alloy	Brand:	MACROKUN
Model：	MKECT-V, MKECT-U, MKECT-T
Length：	4″,6″,8″,10″,12″,14″,16″,18″,20″,24″ , customized (up to 3m)
Surface treatment:	Sand acid oxidation
End cap color：	Yellow, green, red, customized	Package：	Carton

Emulsion Coater Trough

Model: MKECT-V

Dual edge (both thick and thin) design permits coating emulsion thicker or thinner on the screen.

Thinner coats are usually desirable on higher mesh count (200mesh and above) for half-tones and finer detail like 4-color process where thicker coats are usually used for spot color on lower mesh counts (below 200mesh).

Feature:
Convenient to use,

Large emulsion reservoir,

Angled plastic end caps,
Available in most sizes – 2″to 72″.

Emulsion Coater Trough

Model: MKECT-U

It is one of the most price competitive and best designed emulsion scoop coaters for screen printing industry. They are designed
for easy and comfortable handling while providing a smooth layer of emulsion on your screen. The coating angle is designed on a
perfect angle. It’s calibrated to give you a perfect coating of emulsion every time.

Emulsion Coater Trough

Model: MKECT-T

1)Easy & comfortable handling;

2)Controlled coating deposit;
3)Uniform coating of emulsions and blockouts;
4)Designed with high quality aluminum material;
5)Plastic ends are permanent for easy cleaning and no leaking, screws fix covers;

6)Special aluminum cover to protect the emulsion.

The end cap of all models of the Screen Printing Emulsion Coater Trough are made of ABS resin, a special leak protection device that ensures the best angle of the painted glue.

Coat the substrate side of the screen first. Begin your coating pass at the bottom of the screen. Firmly support your screen as you press the edge of the scoop coater against the mesh. Move slowly up the screen and slow down to a stop near the top. Twist the scoop coater upwards and off of the mesh. Flip the screen quickly and repeat on the ink well side.